Thursday, February 26, 2009

Candace Edgerley

I missed the deadline and I hadn't even started! Hoping I hadn't missed a wonderful opportunity due to other deadlines, I wrote to Jane. Of course there was a grace period.

My first thought was to discharge some of the blue. My test piece showed that a Thiox discharge bath would give me various values of lavender.


The entire piece was accordion folded and clamped between two wooden blocks - which will produce a grid pattern. The piece was folded so that original white circles would be preserved, in case I wanted to exploit them later.
Water provides additional resist, so I soaked the block in water for an hour, prior to immersing it in the discharge bath. Thiox removes color without damaging the fabric, but the fumes are toxic, so it is important to wear a good respirator with gas cartridges.












I've decided to use deconstructed screen printing for the additional patterning. This is the technique pioneered by Kerr Grabowski. I chose tech items - as you can see on the newspaper. These are metal parts from old main frame computers, my contribution to recycling. I like combining high tech parts with low tech printing processes.

Thickened fiber reactive H dye is pulled across the silk screen with a squeegee. The metal parts can be seen through the screen.

 Once the dye dries in the screen, more dye can be added. As the screen is printed, the image that dried on it will dissolve, being printed onto the fabric, and gradually deconstructing. 









Watching the dye dry doesn't speed up the process, but a small fan, or space heater helps!Because I used the H series fiber reactive dyes, my piece must be steamed to be set. I usually roll the fabric up in newsprint and steam it in a canning pot for 35 minutes.
The  piece needs a little sparkle, so I use a new favorite tool - a piece of cotton gauze! I wrap it around a hard brayer and roll Speedball metallic grey paint over the cloth. It produces a repeating pattern of the gauze texture. Nice!

The added sparkle helps to soften the straight edges in the areas printed with the dark blue. I'm still not happy with the squared dark edges of those sections. Next time...

I decide to add more sparkle and soft edges. Doing a light pass on newspaper prior to printing each time with the brayer helps prevents blobs.

I'm declaring my piece done. I'm happy with the last layer, which softened edges and added a sense of movement to the piece. The flowing swathes of silver lighten the dark areas, and tie the design elements together.

Conclusion: 
I don't consider myself a complex cloth dyer, so the challenge was to add more layers than I am usually comfortable with. I really had to push myself to accept that the cloth might need another layer! The challenge helped me become more comfortable with layers, but also allowed me to see more depth of pattern and design develop during the process.

8 comments:

Anonymous said...

Its such as you read my mind! You seem to understand a lot approximately this, such as you wrote the e book in it or
something. I feel that you can do with some % to drive the message home a little bit, but other than that, that is excellent blog. A fantastic read. I will certainly be back.

Here is my webpage lib3.com

Anonymous said...

Write more, thats all I have to say. Literally, it seems as though you relied
on the video to make your point. You definitely know what youre talking
about, why waste your intelligence on just posting videos
to your site when you could be giving us something informative to read?


Here is my site; mind meister coupon

Anonymous said...

I like reading an article that can make men and women think.
Also, thanks for allowing for me to comment!



Feel free to surf to my site; custom whiteboard

Anonymous said...

I've been browsing on-line more than three hours these days, but I never found any attention-grabbing article like yours. It's lovely worth sufficient for me.
Personally, if all web owners and bloggers made excellent
content as you did, the internet will likely be much more helpful than ever before.


Visit my blog post - www.ibounion.com

Anonymous said...

Hi, this weekend is pleasant designed for me, for the reason that this moment i am reading this enormous educational paragraph
here at my house.

Here is my web site http://www.baby-community.com/

Anonymous said...

I am genuinely glad to read this web site posts which contains plenty of useful facts, thanks for providing these information.


Here is my homepage; tutorials.firestaff.net

Anonymous said...

Hi to all, how is everything, I think every one is getting
more from this web site, and your views are fastidious
for new users.

Feel free to surf to my web site ... discount dishwashers

Anonymous said...

Hi there! This post could not be written any better! Going through this post reminds me of my previous roommate!
He always kept preaching about this. I most certainly will send this post to him.

Pretty sure he's going to have a great read. I appreciate you for sharing!

Feel free to visit my web-site; http://slidefuse.net/wiki/index.php?title=User:StaceyKet