The Art Cloth Challenge

The Joy of Discovery

2009-02-26T17:34:00.003-06:00

When I edited these comments and reviewed the photographs, I was struck by the immense energy, talent and dedication exhibited by the twelve participants. I hope you will take time to read each of their stories of frustration, exuberance, fear, delight and realization. Every one is worth the time. Start at the end, or start at the beginning. Read it all now, or visit again, and absorb the depth of commitment witnessed here. It is a high calling to choose to be Artist. Maker.

These twelve willingly embrace the call.

Thanks to all who stepped up to the plate.

Jane

Katherine Sylvan

2009-02-26T14:03:00.015-06:00

December 27, 2007: Received package today. Open it. First feeling is panic…….our vacation falls smack in the middle of this project . This is good and bad. Good…won’t have time for contemplating my art cloth navel in agonizing over techniques. Bad…won’t have time for any stitching around those tied circles.

Many aha moments. I think I see what she is doing….it is fairly easy to slap a few layers of dye or stamping or screening on a light-value piece, but it is something else to start with a dark value (and already taking up most of the dye sites on this light-weight 12 mm silk) and bring it back to life. This smoky blue is exactly the same color I see when I look outside in December and January. It is a combination of the low, dark ceiling of wet clouds, the distant foggy and wet mountains, the wet driveway, my wet Gore-Tex jacket and hat after my wet walks. It is everything that makes me depressed in this bizarre climate. Using lively colors and imagery will help pull me above SAD.

I see that 402c Mixing Blue discharges to a good white whether it is a light value or dark value of the blue. This is great! Spent some time looking at the tools I already have and could use with this piece, and tools I might need to make. Have decided not to make any new silk-screens for this as there isn’t time. Think I want to use a couple of my older screens and then do the remainder with brushes and unthickened dye.

December 29: At the same time I am working on this challenge, I am learning how to use my new digital camera. I am on p. 13 of 123 pages, and so far the only thing I have learned is that I shouldn’t carry my digital camera in my back pocket because it could blow up if I sat on it.

December 30: Dye not yet arrived. Spent the afternoon sketching some design ideas. I know I want to discharge most of the blue. The tied resist circles, all on the same plane and all close in size. I wonder how I could design this piece so that the circles appear to be different sizes from each other and more scattered. Is this fiddling too much with Jane’s initial design? Is this permitted? Is this ethical? Having been raised in the 40’s and 50’s, I was taught to wait and ask for permission. How many opportunities have I missed doing this? Took me many years to unteach myself. Well, in her guidelines Jane gave us a lot of leeway so I shall forge on.

December 31: Dye arrived this morning. Dyed some of my own 12 mm with the dye to use as test pieces and for auditioning dye colors and paint colors.

January 1: Coated the test piece with flour paste. The formula I used became very thick after five minutes. Was difficult to spread on the silk. Just before the flour was dry, I impressed on one half with a Wel-Cote texture roller in what they call their “Swirl” design, which is more like overlapping shells, and then also circles with an oval whisk. Let it dry overnight.

January 2: Painted on Dye-Na-Flow in #812 Periwinkle and #822 Sulphur. Lesson learned: use a much lighter touch with the tools. I am also experimenting with gel medium as a permanent resist, and continuing with the flour paste.

January 9, 10, 11: LAYER 1 - Screened the matte gel onto the challenge piece. LAYER 2 - After the matte gel completely dried, I discharged the entire piece. There was a change to a much darker blue under the matte resist, which was a shock. It will make a difference in how I use my dye colors. Must change my color plans. I really liked the lighter blue under the discharge better.

January 13: LAYER 3 - Painted on flour paste. Found that I had to do this in stages, letting one area dry before going to another area. Let dry overnight.

January 14: Painted Dye-Na-Flow Sulphur and Periwinkle on LAYER 3.

While this was drying, I dye-painted my third test piece with new colors, dried it, steamed and stabilized it. It is so freeing to just paint dye stock solution on cloth rather than having to mix it with sodium alginate. I like the feeling of moving my arm and brush across the silk, observing how hues layer on top of each other. It becomes a meditation. The colors on this last test piece are gorgeous and just how I envisioned them. Even the depth of shade is perfect. Am I ever thankful I did all that testing beforehand.

January 15 – 17: I added dye layers, steaming in between. With this set of primaries which is new to me, because of the blue 402c, I have found a whole new palette…mustard, olive greens, rusts. Beautiful.

In the back of my mind, I have been imagining a secret room in a Bruges cloth merchant’s house circa 1400s where there is a stack of velvet sent from Italy for dyeing. When the historian discovers the room in 2007, the rich olive greens and purples have faded over time into mustards and lavenders. I am working on achieving the look of folded cloth piled in a corner. So far, the imagery is confusing, or, to use a Yiddish word, it looks too ongepotchket (to rhyme with Fonda Lodge kit) I am hoping to tame this when I add the textile paint layer.

I digress. Yiddish is such a colorful language. Ongepotchket means, “Slapped together without form or sense, messed up, or excessively and unaesthetically decorated, overly baroque.” (From The Joys of Yiddish) “Mr. Fleishman, a new art collector, bought a painting which was much admired by his friend Myerson, a self-proclaimed expert: The painting was one large square of black, with a dot of white in the center. A year later, Mr. Fleishman bought another painting by the same modernist genius: A large square with two white dots. Proudly, Fleishman hung the picture over his fireplace and telephoned his art maven friend Myerson to come right over. Myerson took one look at the picture and wrinkled his nose; “I don’t like it. Too ongepotchket.”

Thought I would interject some humor for my gentle reader in all of these “First I did this,” and “then I did that,” and “I didn’t like that so I did, blah, blah.”

February 4: My two weeks away on vacation have given me a fresh look at my challenge piece. My fresh look tells me that I am still uncomfortable with the composition, but that this color way has many possibilities. Applied the vat dye LAYER 9 this morning.

February 6: Added textile paint with a wall texture roller - the last layer - LAYER 11, in five colors: Lumiere Halo Violet-Gold, Setacolor Amethyst, Jacquard Metallic Violet, Setacolor Light Copper, and Lumiere Metallic Olive Green.

Conclusion: When I took my last digital photos of the finished cloth, and saw the completed piece as a whole through my camera, I was amazed that I had created another landscape, not the pile of ancient velvet cloths I imagined. I thought I’d exhausted my need to focus on landscapes, but I see I now have more landscapes waiting to be realized. I am reminded of Ralph Waldo Emerson’s quote, “The earth laughs in flowers.” My challenge piece looks like irrigation circles in fields of wildflowers.

Finished with one week to spare! I have had a sense of anxiety while working on this challenge; at the same time, however, each new layer brought such a sense of joy and discovery and new design challenges. I can say I am satisfied with this piece and eager to share it with the world.

Britta Ankenbauer

2009-02-26T13:26:00.013-06:00

Silk is hanging in my studio, for first impressions. Waiting for a feeling concerning colour, theme and inspirations.

No theme yet, applying wax (cold) and Procion MX: bright green, lemon yellow and carmine red, frottage/rubbing red over a plastic sheet.

Drying fabric. After this, applying more wax on coloured regions, no theme, no idea for a title, the coloured fabric seems beautiful but like a background.

Applying navy blue (MX), washing out after 8 hours.

Tore off the 1/4 yd test fabric, for a better feeling of the design, balance of the colours and the composition. Thermofax silkscreens applied with Javana Tex (Paint) in opaque vanilla white. Good results, and the title is now clear: The Winner.

Overwriting the alphabet with a fabric marker and applying circles with a stamp, setacolor opaque, shimmer gold paints.

Design decision: finished or not? Not!

Enjoying the painting with acrylic. Not sure if they would keep good on the silk. Test: washing out the test piece - no problems, the colours keep well on the fabric.

Monoprint for more focal point with Javana Tex vanilla. Applied too much, so I rub off some of the paint.

Pressing and washing out: keeps well, but I feel it is too bright in relation with the other colours.

Painting on the white areas with acrylics - Javana Tex opaque dark blue and Javana Tex sunny, bright blue, turquoise and carmine red.

Last finishes with wax crayons (Neocolor I from Caran D’ache)

Washing, pressing, finish!

Candace Edgerley

2009-02-26T12:36:00.016-06:00

I missed the deadline and I hadn't even started! Hoping I hadn't missed a wonderful opportunity due to other deadlines, I wrote to Jane. Of course there was a grace period.

My first thought was to discharge some of the blue. My test piece showed that a Thiox discharge bath would give me various values of lavender.

The entire piece was accordion folded and clamped between two wooden blocks - which will produce a grid pattern. The piece was folded so that original white circles would be preserved, in case I wanted to exploit them later.

Water provides additional resist, so I soaked the block in water for an hour, prior to immersing it in the discharge bath. Thiox removes color without damaging the fabric, but the fumes are toxic, so it is important to wear a good respirator with gas cartridges.

I've decided to use deconstructed screen printing for the additional patterning. This is the technique pioneered by Kerr Grabowski. I chose tech items - as you can see on the newspaper. These are metal parts from old main frame computers, my contribution to recycling. I like combining high tech parts with low tech printing processes.

Thickened fiber reactive H dye is pulled across the silk screen with a squeegee. The metal parts can be seen through the screen.

Once the dye dries in the screen, more dye can be added. As the screen is printed, the image that dried on it will dissolve, being printed onto the fabric, and gradually deconstructing.

Watching the dye dry doesn't speed up the process, but a small fan, or space heater helps!Because I used the H series fiber reactive dyes, my piece must be steamed to be set. I usually roll the fabric up in newsprint and steam it in a canning pot for 35 minutes.

The piece needs a little sparkle, so I use a new favorite tool - a piece of cotton gauze! I wrap it around a hard brayer and roll Speedball metallic grey paint over the cloth. It produces a repeating pattern of the gauze texture. Nice!

The added sparkle helps to soften the straight edges in the areas printed with the dark blue. I'm still not happy with the squared dark edges of those sections. Next time...

I decide to add more sparkle and soft edges. Doing a light pass on newspaper prior to printing each time with the brayer helps prevents blobs.

I'm declaring my piece done. I'm happy with the last layer, which softened edges and added a sense of movement to the piece. The flowing swathes of silver lighten the dark areas, and tie the design elements together.

Conclusion:

I don't consider myself a complex cloth dyer, so the challenge was to add more layers than I am usually comfortable with. I really had to push myself to accept that the cloth might need another layer! The challenge helped me become more comfortable with layers, but also allowed me to see more depth of pattern and design develop during the process.

Kathy Hays

2009-02-26T11:59:00.006-06:00

I thought about using circles as the main theme.

I auditioned numerous circles in different sizes.

I was puzzled by what to do with the circles down the center of the silk.

I decided to discharge circle shapes over the entire piece.

The discharge was with Jacquard Discharge Paste and went well.

I decided to overdye with Olive Green.

The resulting color was horrible! I think the dye solution was too strong.

I pulled my hair out for about five days trying to decide how to resolve the dilemma.

I chose to discharge using only one organic looking circle shape.

The results were pretty good, and I was pleased with the rust orange color.

I knew now, that overdye was not an option, so I chose paint.

I painted some discharged areas with Color Hue.

I decided I needed some larger elements, so I added the gold rings.

I wasn't happy with the large rings, and decided to enhance them with a second gold color.

I thought adding green rings would be helpful, but they are not really visible.

I decided to add some gold paint dibs and dabs.

Finally stamped additional circles of different sizes and colors - red, yellow, gold and green.

Conclusion:

I am somewhat emotionless with the results. Because I made a mistake early on, with the olive dye, it was hard to get my momentum back. The failure to execute a process successfully (to my eye) took me off my mark, so I am ambivalent about the outcome. I am hoping that when I haven't seen the piece for awhile, I will eventually like what I did. I know I was truly challenged, and for that I am thankful! Had this piece been a piece of my own, I would have tossed it in the trash after the overdye session. But I couldn't walk away from this piece, and I had to finish it! It was a great exercise for me to complete something and problem solve.

Dominie Nash

2009-02-26T11:33:00.009-06:00

This will surely be a challenge. The color is lovely but a little darker than I’m used to as a starting point, and I’m not sure how to deal with the white shibori circles down the center.

Also, I rarely work with silk.

Tried leaf rubbings with Jacquard Discharge Paste—got no impressions—just diffuse areas of discharge. Maybe silk is too soft to make an impression with the slippery paste. Or maybe the fact that I used some old, acrylic-coated leaves? Will try the only remaining leaves in the garden—oak leaf and hydrangea-- and try using textile paint.

The pigment (blue Jacquard) worked well with both old and new leaves. Painted over the circles with watered down blue Peintex with a little black mixed in. They are much less obvious. Used the Peintex in a few other areas also. I’ll print over the painted areas in the next stage as well.

Screen printed leaves in 2 sizes with illumination paste (1 part Jacquard Discharge Paste to 1 part Jacquard paint). Used thermofax screens and a red-orange paint. Really liked the way the leaves stood out even on the blue background, thanks to the discharging. (Used the leftover paint on some commercial black fabric and that worked well too—this will go into my repertoire for sure—was happy to learn that it is ok health and safety-wise)

The areas painted with Peintex really stick out—my attempts at a loose watercolor effect just look like accidental blobs. What to do???

Turned Peintex blobs into squares and rectangles—they look a little dark but much better design-wise; relating to geometric areas resulting from leaf printing with blue Jacquard. I plan to cover some accidental white lines (from original discharging) with metallic paint or maybe Shiva Paintsticks to resemble branches. Can extend lines to go over the blue shapes to inegrate/ground them...

Decided on the paintsticks, gold covered with copper, following white lines and adding more. I think this works with the overall design as well as softening the blue shapes. Will heat set and wash in a few days, keeping fingers crossed!

Heat-set and washed successfully. Photographed and ready to send off.

Conclusion: In retrospect, I learned a lot, some of which I’m sure I will use in future work. It seems as if most of what I did was a result of trying to solve a problem encountered in the previous step, but I’ve concluded that problem-solving is in the nature of art and is what keeps us going to the next thing.

Contact Dominie Nash at dominienash.com

K Taltre

2009-02-26T11:04:00.008-06:00

Jane Dunnewold sent a 2 yard cut of 10mm silk habotai dyed with Procion MX mixing blue - with tied resisted rings down the middle of the length. There were five circles on my cloth.

Before I received the cloth, I knew that I wanted to add dimension and holes to it. When I saw the cloth I felt I should keep some form of Jane's tied circles in it.

To begin, I retied the five circles with artificial sinew, wet the cloth and scrunched it into a plastic pan with the five points down. I poured hot thiorea dioxide water over the cloth - it didn't cover it - and microwaved it for several minutes until the fabric started to discharge. The discharging occurred only on the bottom of the pan where the cloth was sitting in the bath. I rinsed the fabric.

The circles are still tied - I again scrunched the wet fabric into the pan with the points sticking up and squirt bottle dyed the fabric with soda ash activated Procion MX dyes, microwaved for a few minutes till hot and steamy, waited until cool, then washed, took off the sinew and dried.

This was interesting, but kinda boring So.......

I tied up the five circles again and tied 18 more circles in a grid, and also tied some fan folds across the piece. I wet the cloth and scrunched it again in a pan, bathed it in the thiorea dioxide solution, microwaved - took a lot of color out. I rinsed and scrunced it back into the pan where I redyed with the mx dyes. Again the microwave - hot steamy - cool down - removed the sinew - washed and dried, much more interesting.

Next, I printed a couple of motifs with soda ash activated, sodium alginate thickened, MX dyes. One was my hand carved stamp. The feather was a commercial stamp. I spritzed a little soda ash water over the cloth, wrapped it in plastic and microwaved it till hot/steamy, then washed and dried.

The feather motif seemed too strong. I thought after washing, it would back down, haha, any MX color with fuchsia in it never backs down! With my circle stamp I applied a mixture of sparkly gold paints over the red feather. Better.

Now for the holes. I cut circles of freezer paper and arranged them on the fabric and ironed them on. I stabilized the holes by applying paint around the freezer paper circles. After the paint was dry, I cut out the circles. I ironed/pressed the painted parts to set the paint.

I decided to use some "hot fix" Angelina in the holes, hot fixed some and cut into circles to fit the holes. I cut some water soluable stabilizer to back the holes so I could sew the Angelina into the holes. I dabbed fabric glue stick on the stabilizer so it wouldn't move. I stabilized each hole in an embroidery hoop, and free motioned (using the sewing machine with the feed dogs in the down position) the Angelina into each hole. I soaked the fabric in warm water to remove the stabilizer - washed/dried.

Now for the dimension. As I worked on the main fabric, I was discharging and dyeing several other pieces of silk in the same colors as the main piece. I cut strips of this silk and used Misty Fuse to fuse them together, back to back. I free rotary cut triangles from the strips and then rounded two corners with scissors. If you pinch the rounded end together, the triangle stands up when sewn down. I used fabric glue stick to hold the dart; I sat at the table and glued and ironed each dart to set. The triangles were zigzagged on, around the tied circle shapes, at random.

The final process was to iron on foil shapes using Wonder Under. I then washed the cloth one more time to make the triangles floppy and to rough up the foil shapes.

Conclusion: At each stage of the process, except for the dyeing parts, I practiced the process on a different piece of silk. The holes with Angelina and free motion sewing on silk were problematic. The free motion sewing would draw up the fabric; the hoop was the answer, but I thought I'd have to take off the machine foot for each hole. I realized I could lift the foot over the hoop as the foot has a spring and the needle would go up a little more too. Foiling has always been beyond me, but I read about using it with fusible web so have made a sort of peace with it.

Jennifer Cooper

2009-02-25T15:32:00.014-06:00

Cloth received Jan 7, two anxious weeks later than expected, but finally here. Love the colour, but don’t want to get too attached to it, as that isn’t going to last long. Pinned it to my design wall, notice my weight bench upright blocking view?

Decided to wait a bit before diving in, and “listen” to the cloth. Did some research on Mixing Blue 402c, and learned it should discharge to a grey. This should be good. I did a test, and it discharged completely, to a wonderful white. You definitely knew what you were doing when you pre dyed our pieces with this Mixing Blue. Fantastic – got to get me some of this stuff from Pro Chem. Knowing it will go white, anything could happen.

After a week of listing possibilities and ideas, and generally procrastinating … I decide to let the elastic band marks guide my start. I also decide that I want to respect the original blue in some way, so must enable some of it to shine through. Using my husband’s glass marble collection, and some old golf balls of my dad’s … I elastic band wrap lots in a zig zagging swirl down the middle area, and then position 4 golf balls in outer edge areas. 186 marbles, 4 golf balls …Then a quick discharge bath in thiox, and ….

Now what? Cloth started blue, so I figured complementary oranges might be a nice place to start. Listen to the cloth.

I arranged the white bound silk in the largest plastic tray I could find in our basement. Lucky for me, I already owned something big enough to lay 2 m of cloth into. Next step was going to be tray dyeing, using some basic primary MX: Pro Chem Golden Yellow 104, and Pro Chem Mixing Red 305. Used 1 tsp powder dye in 1 c of water, to make a simple concentrate solution.

Blue outlines I had expected, but the blending of golds, oranges to reds, ended up being much stronger and brighter than I had expected. On cotton, these basic primaries are much more toned and less in your face. What did I expect? Silk is not cotton.

Lots of possibilities to overdye, add more bound shapes? Decided to use some even smaller glass beads to elastic bind into areas. To widen and thicken the curves of the zig zag. Elastic bound these. Then, soda soaked the cloth in 9 T soda ash, plus 1 gal water. 20 minutes. Squeezed out excess. Arranged back into the large tray. Only wanted to drip drop various dyes over top of the new bound beads, and some over the edge red areas. Used 1 tsp Pro Chem ProIntense Blue 406, in 1 c water. Dripped and eye dropper dropped. Covered tray, batched overnight. Rinsed well.Hmm … got the little squares and some nice soft blue in the original squares. But the red didn’t soften as I had hoped.

Asked a few dyer friends about silk and dye saturation points … none really had experienced this. Hmm … maybe it’s the soda soaking? I really want to darken those edges. So … against the odds, I re tried the soda soaking, using a 3 T Maiwa Brown in ½ c water concentrate. This was a super dark concentrate. Tray dyed again, and poured and spooned concentrate directly over areas I wanted darker. Batched 8 hours. Was looking great in the tray. Rinsed. Oh no….. most of the beautiful darkness washed down the drain. Cloth had darkened a bit, but not like it should have. Boo hoo. Well, now what? Looks as though using dye was out of the question. Would need to start using fabric paints.

Maybe potato dextrin texturing might be interesting. That way I could paint in dark Setacolour into the crackles, and darken in a subtle manner. Never tried potato dextrin before, but was willing to try it to get those wonderful organic crackles. Just happened to have a bag in the cupboard. It’s surprising what one accumulates over time. I forged ahead with the application. It dried with great cracking and veins. Sure hope this works – had to wait 2 days for it all to dry on the dining room table. Once dry, I even crumbled everything up and made even more cracks into cloth surface by squeezing it all up tightly. Had just received the latest Quilting Arts issue, and couldn’t believe it when I saw your article about flour mixtures over cloth. As I waited for my “potatoes” to dry, I marveled how coincidental the timing of your article seemed.

Hard to believe that with all that dark paint, only these light cracks showed through. Now how am I going to darken areas I want darker?

Guess I’ll have to resort to printing or screening. I’m not very skilled at either, and seem to make blobs in unwanted spots, but what choice do I have? Made up some potential thermofax screen images – photocopies of elastic bound marbles, done in soft swirls and curves. Looked OK, crisp copies. Oh Oh, tattoo shop closed – staff gone on holidays. They’re the only shop nearby with a thermofax machine. I’m just going to make stamps and print areas darker.

Once cloth dry, I brushed Opaque Setacolour firmly and harshly into the cracks and over dextrin surface. A mix of Raw Sienna and Black – a great dark brown. This better work. Edges were now very dark brown. Let it rest 24 hours, as I was now running out of time to finish this whole challenge. Soaked, rinsed, soaked, rinsed. Only minor cracking marks emerged. So sad … the veining is definitely interesting, but not enough to truly give the effect I had sought. When and if I use dextrin again, I’m going to begin at the white, flat cloth stage, and really go to town with the cracks and use pure black Setacolor. Feeling the push to finish. It’s now Feb 15^th and the cloth needs to be mailed by the 23^rd. So …. using Colorhue Brown, mixed with some Scarlet and water, I begin darkening.

First the cloth was misted with water, to dampen. Then, using a natural sponge, I begin to sponge on the browns. Maybe now this darkness will stay in the cloth. Woops, the phone rings and I make the mistake of answering it and talking for several minutes. I’m too late to remist with water and soften the sponge marks. What’s to be, is to be. Oh well, at least things are darker nowI then added even more printed squares around the edges. But that lower golf ball square is looking odd and lost. Hmm … What to do? I decide to discharge it using Jacquard Paste and then change its colour. Something to counter or provide more balance and tension to the upper three squares? The discharge paste works fine, and lightens it to a soft yellow – but then I remember, everything now needs to be washed thoroughly to remove the paste residue, before recolouring. There’s no turning back … so I fill the sink, and in goes the cloth. I hold my breath, and …thank goodness, no colour bleeds out. I am so lucky. I let everything dry overnight, and re pin to printing board to add more printed sponge squares.

I begin to colour in the lightened larger lower square with Caran dAche Neocolor II water soluble crayons. Trying to create a similar turquoisy blue as in the centre swirl. Maybe this will be OK, but I need to let it dry. Tomorrow will be my last day being able to work with the cloth. It’s got to get in the mail.

Things looked OK dry – so I added just a very few more printed squares before I went to work. This was it – I knew it had to dry during the day to allow me to iron and package for tomorrow. What I’ve created is not truly finished, but all I can do given the time at hand. I would love to keep darkening the edge areas, maybe with more Colorhue? More printing? I’d love to add some foiling – a glimmering swirl down the centre, with a few sparkles throughout the outer areas. Maybe even some Shiva rubbing texture?

Conclusion: Oh well. Enough is enough, I have to get things mailed off to reach Texas in time for the Mar 1 due date. I am happy with some areas, but disappointed in many. It’s not quite what I had envisioned, but it’s the best I could I do. I am not an expert at any of these techniques, just a fearless adventurer who loves to play.

Bev Snow

2009-02-25T14:35:00.009-06:00

I began with 2 ¼ yds 12mm silk haboti already dyed with PROchem Mixing Blue 402C. Down the center of the cloth were 5 circles that had been produced by a tight rubber band resist when it was dyed blue.

To introduce more color and subtle striping, I did arashi shibori, wrapping the cloth around a 6” pvc pipe. I made large folds, as I didn’t want to produce a strong striping image. The pipe was soaked in a soda ash solution for 30 minutes.

Squeezing out excess solution, I applied Lemon yellow and Havana Brown (separately, not mixed together) by direct application. Each dye was mixed in a urea/water solution for application. The cloth then batched on its tray overnight. The cloth was then rinsed in cold water, unwrapped, and soaked in synthropol bath for an hour, rinsed, and dried.

I decided to focus on repeating the circular theme of the images on the original cloth, with an additional image with straight lines to break up the circular motion. The arashi also provided subtle lines through portions of the cloth. Three silkscreens had been created using photo emulsion developer. The other silkscreen was a blank, with blue masking tape applied to the bottom. This image was screened in the black paint.

I pinned the cloth to my work table, and silk-screened a large celtic knot circle using Jacquard Discharge Paste. This dried overnight. I tried to steam the images with a steam iron, and got no discharged image. I then placed it in a steamer, and still no discharge after 30 minutes. Giving up and moving on, I then washed the cloth, removing the discharge paste.

I used thickened (with alginate) dyes to silkscreen more images onto the cloth. Hot Pink was used for the nautilus shell and the large celtic knot and Havana Brown for the smaller celtic knot images. The cloth cured overnight, and then was rinsed and washed in a synthropol bath and dried. The alginate had been originally prepared 3 years ago (!) and kept in the refrigerator. I removed it from the fridge the night before using it so it would come to room temperature. It was perfect!

The remaining silk screen and circular images were created with paints. I used Golden Acrylic Green Gold (with GAC900 Textile Medium added), and Jacquard Textile Metallic paint in #143 Metallic Copper and #122 Black. The larger circles were stamped using a film canister. The smaller circles were made using the opening of a medicine container. The paints cured on the cloth for 2 days. The cloth was then ironed to finish setting the paints.

Contact Bev Snow at snow-bee@worldnet.att.net

Gerry Congdon

2009-02-25T13:27:00.020-06:00

Experimenting to find an over dye color: I tore off the extra ¼ yard of fabric and cut it into several pieces that were clamped and tied. I mixed up six different dyes: strong orange, rust orange, basic red, avocado, bright green, and golden yellow.

I compared the results, and decided to go with Strong Orange. I liked the possibilities of working with the brownish tones.

I folded the fabric lengthwise in accordion pleats. I then folded it in the other direction - again in accordion pleats. I secured it with rubber bands.

This is what it looked like at that stage:

I wanted to discharge an image, so I tested a sample of the fabric.

Next I created a large silkscreen, with a repeating image, using masking tape.

I discharged the image, but I had trouble with the discharge paste and the screen. I may have used the wrong mesh size. The result was not as crisp as I had intended. I decided to screen print pigment (textile paint) over the discharged images. I chose Lumiere brand in Burnt Orange. I used vinyl mesh and bubble wrap for the pattern.

I hoped the printing would add depth and interest to the linear images. I used a variety of Lumiere paints at this stage. I rolled paint onto the mesh with a foam roller and then used my hands (in gloves) to press the paint onto the fabric.

I added thermofax screened circles to the piece because I hoped they would echo the circles which had been tie-dyed at the beginning. (the original cloth) I drew a circle with India Ink and a brush in order to get the image for the thermofax. After I came up with a pleasing arrangement, I cut circles from paper and pinned them to the fabric. This helped in the placement of the printed circles. I used Lumiere Metallic Rust paint.

For the final printing, I wanted to fill in the areas around the linear shapes, but I wanted a calmer, receding pattern. I decided to stay with the Bubblewrap patterning. This time, I used blue and a bit of metallic turquoise.

Gerry Congdon can be reached at gericon@comcast.net

Judy Langille

2009-02-25T13:13:00.014-06:00

Dec.26- Received fabric from Jane.

Dec. 28- Created some new thermofaxes using a new texture I had developed this summer. This texture was created with handmade marks by using a plexy glass rod and instant indigo and hitting that against a variety of papers.

Dec. 29- Printed with new screens using dark brown and bronze thickened dyes. Also created a large circle with the same texture and printed that with navy dyes and some smaller circles printed with pagoda red. I decided to use the tied dyed circles on the starting fabric as inspiration for the design.

Dec. 30- Washed fabric and found textures and colors were way too subtle, but a good background.

Jan. 1 and 2- Tore freezer paper to create areas of resist to enhance and bring out areas in order to create a strong composition. Using discharge paste I removed about half of the color from the blue fabric. The resulting design was way more dramatic, a light bluish color.

Jan. 14- Added more torn paper to design and painted with 4 colors – greens, browns and teal.

Jan. 15- Washed fabric and found the brown was way too red. So I repapered and removed most of the brown with discharge paste. I also discharged rings of texture in the solid areas. A glowing golden color appeared when the discharged pasted was removed from the brown areas.

Jan.24- Added more texture to the golden areas using browns, bronze and teal to bring the whole composition together.

Feb. 5- Added one more layer of discharge area in areas that still seemed dark to add a bit more brightness to the fabric.

Susie Monday

2009-02-25T12:17:00.011-06:00

December 20, 2007

Initial impression – EEEK – hate that mixing blue, and what will there be room to add, it looks pretty intense. Discharge paste is not my favorite medium but I think I will have to take some of the color out of it. Second, the round rubberbanded row of circles right down the center, the whole symmetry of it is a hard element for me.

Hanging it on the wall, maybe the blue is not so bad after all.

Now I want to work with soy wax since that’s the new boyfriend. I could use the circle patterns that I have been working with on the last few pieces of complex cloth. These have been what I call in my mind MEDITATION CLOTH because of the repetitions of the images, the simplest most seen most felt shape of all of us. The other idea would be to take the FERTILITY CLOTH imagery further, and look at that idea with new imagery.

I like focus and intense energy for problem solving. Its not my nature or my instinct to work too slowly on a challenge project like this, BUT I think I want to dye some more silk and put this same design on it so that I can play with it in series. A Series started by someone else is a really interesting idea.

PATTERN : “An ancient Egyptian craftsman manipulated nature by tracing the spots off a leopard’s skin and then reversing them to make a pattern of pale ivory patches set into black ebony. “ pg 254 The Art of Looking Sideways... Look at the next page for tessellation of a floor tile...then the squiggly pattern contrived by Ettore Sottsass from pictures of swarming bacteria BACTERIO (1970s)

It is a constant idea of mine, that behind the cotton wool (of daily reality) is hidden a pattern: that we – I mean all human beings – are connected with this: that the whole world is a work of art: that we are parts of the work of art – Virginia Wolfe ... Another idea – make some squiggles from that doodling program... Another idea – make a goddess like my quilts but just with art cloth techniques, layering, dyeing, a challenge for sure, how would that work. Think I can do that with something different. Figurative and layeredly. THAT would be a challenge. If I were to try this idea I would first discharge the general shape down the center of the fabric, less ¼ inch. Leaving the blue as the negative background space around it. This could be a challenge to put my art quilt and art cloth ideas together in yet another way - with dye, discharge, complex layering, paint and stitching... the heaviness of the quilted surface giving way to a figure more ephemeral? I wonder if it would still read as art cloth with such a strong narrative content to drive it?

NEXT VISIT: After looking at the cloth on the wall for a month. I don’t like the mixing blue color any better. I hate that there are so few light areas. I feel forced into discharge and I HATE to discharge silk. Whether discharge paste or thiox is safer than bleach is probably not the issue, but I don’t have a respirator that fits me well, would not use it enough to justify the expense, I have small narrow face and Ive never found one that fit well. This makes the challenge really tough, because the value of the piece is so dark already, Having to figure out how to go dark, darker OR use paint which changes the hand so in order to have lighter areas will be my issues to deal with.

Tried about 6 different overdyes today – black and reds seem best to me – I don’t really like the greens that come up with yellow. The browns from orange dyes seem really ugly to me. But – I know EVERYONE will do purples!! (See how weird it is to consider the “competition”) I want to make a different , diverse, piece that NO ONE BUT ME would think to do. How egotistical is that? Well, at least I want to make it more mine than anyone else's.

I think given my work of the past months, I will do soy wax and over paint. BUT I may try to boil out some of the color with rit color remover. Used outdoors, not around me. Or I will use paint and deal with the change of hand.

WHAT I DID TODAY. HELL, I LIKE TO PLAY AND IMPROVISE.

Started soy wax with circles and curly thingies all over, like the last couple of meditation pieces. After the paint experiment I decided to use paint as the light value and I screen printed the fertility ovum with what I thought was white, it was irredescent violet – wow...looks cool. This is printed OVER the soy wax so the wax witll resist some of the paint, THEN I painted wax over areas that I liked, the nucleus of the ovum, and some of the cell walls. This seemed to make a large band down the center. Dye painted with a fuschia down the middle, and as bars to make a cross emblem, then black dye on the rest of the edges. Also printed the edges with one of my scribble mark screens. Same paint.

Wrapped it up in plastic and tomorrow I plan to either dye print, or just wash it all out and see what I have so far. Probably will need to add more dye painting, and I will need to iron the irridescent violet areas. Hoping the hot wax helped to fix those, too. No fumes, just messy so far. Fun to play with the shapes and textures and patterns. I suspect we will still need some light contrast.

January 20, 2008

I like what’s happened, even though the colors as expected, are dark – there is a value shift with the paint even though some washed out. The distressed look of it I like, the way the wax served as a resist for the textile paint and the dye. It has the shape, subtly, of the kind of cross/shaman image. I would like to emphasize this with either paint, stitching or fused small bits – all of which need to be in the complementary yellow orange that will make the navy and violet-blue more interesting. Trying some options – the embroidery thread is good, but very time consuming and time is short right not. Still it may be the best answer. I am trying some puff paint samples and also need to test the fusing. One issue is to have the contrast of something really crisp and precise against all the distressed and organically messy kind of work. This is another fertility cloth, but seems like it's really old eggs.

January 22, 2008

Finished the challenge piece with Shiva paint sticks – glowing planets with little scratched crosses to make them more interesting-- and pigment pens – scribbling a layer of letters to the Universe. The name of this piece has gone several directions: Fertility Cloth #3 since it is related in imagery to those other two silk pieces, but I don’t have the sperm on it, just the ovum at a cellular view. Then it occurred to me that it also looked like the other end of the cosmic spectrum—the color and swirl is very nebula-ish in imagery, too. So the piece is called POWER OF TEN after the Ray and Charles Eames film of the same name, a piece that shows the similarity of structure and form from cellular to universal scale. One last step in 24 hours or so, iron the ink and shiva stick to heat set it all. And tear the selvedges? I need to look at the instructions, Oh and take a final set of photos for my records.

Conclusion: This piece in process was about playing with materials and with value. The technical problem: how to get depth and value range without discharge chemicals, since I don’t really want to use them. I think I have succeeded in a rather safe fashion – its an analogous palette which is quite easy to make work – I perhaps could have been more daring with color but nothing else I tried pleased me with the deep blue start.

www.susiemonday.com

Linda Stokes

2009-02-25T11:31:00.011-06:00

I used Napthol (Azoic) dyes for the challenge because I felt more confident with them than with Procion. Also, they had properties I wanted to use. I didn’t want to change the hand of the silk too much so decided to use mainly dye processes. I did try using discharge (Rongalite) on the silk but found it didn’t work very well, also stiffening the silk.

After ruling out discharge and realizing I would have to work over the colour already in the silk, I made a design plan just using pencil on paper. At first I followed this but it changed a bit as I went along.

The first step was to silkscreen print with thickened dye. I used several photographic screens I had made a few years ago with a garden theme. The central motif was the first print but I wasn’t happy with the way it printed as it was too light. I planned to fix this later and went on printing with other screens, placing the prints fairly randomly and repeating them radiating out from the central motif to about halfway down the fabric.

I overprinted one edge of the silk with a collaged rose design using torn paper to give a rough edge and placed some brick prints at random on the other side.

When the printing was finished I used cold wax resist to hand paint a leaf/fern like design in a band across the cloth. I then used elastic bands to resist the dye in the bottom section of the cloth and dipped it in green diazo.

One of the properties of Napthol dyes is that once a dyed section has reacted (napthol then diazo) no further reaction can take place unless the fabric is re-dipped in napthol, which makes it easy to dye different sections. Also the reaction time is almost instant.

After dipping the bottom section I folded the silk through the band of cold wax ferns, scrunched it and dipped into a red/brown.

I like the way the dye makes feathery edges so I dipped the top and sides separately into scarlet and red AL, then another band of scarlet across the fabric.

I improved the centre motif by hand painting the problem section in the same colour as the original print with the intention of over printing it. This meant I had to redip into Napthol. So I also dip dyed over all the edges with violet. I made a contact stencil for the shape inside the centre motif and overprinted it with a bark design. I printed across the top of the tie-dyed section with a wood block wrapped with string. I felt that the cloth was getting a bit divided so I integrated the different sections by using a sponge roller to colour roughly pleated fabric in some areas and a little more overdyeing.

I wanted to use metallic textile paint sparingly just as a highlight so printed another row with the string block then used a lino block with another leafy design.

Conclusion: Although I used screens and blocks I already had made, I used them together in a different way than previously. Most of my large cloth work has been prints designed to repeat on a dyed background. This challenge has given me a new way of looking at cloth. I had already planned to spend this year increasing my dyeing skills and putting into practice all the information I’ve recently come across through books and the Complex Cloth discussion group.

I’ve recently tried breakdown printing for the first time and can see huge possibilities there. I was reasonably happy with the finished result but I would do it differently if I did it again.

contact Linda at lindastokes11@hotmail.com